QRMax Base Quick Release Plate

  • Model: QRMaxBase
  • Shipping Weight: 340g
  • Made to Order
  • Manufactured by: QR4rigs

 Ask a Question 

Starting at: £35.72

Please Choose:

Add to Cart:

The Quick Release Max System is based around a 180mm x 150mm baseplate and is designed to accomodate most table mounted peripherals.

The mounting holes are at 78.4mm centers and a rectangular pattern of 150mm x 60.1mm to give mounting choices. We have designed these base plates with the same mounting points for the most common racing and flight sim controllers so they will fix easily to some if not most racing or flight themed rigs already out there. A template is provided below for those who are more DIY minded and may have a solid mounting plate that requires drilling.

This Kit contains:

  • QRMax Base Plate Assembly (black) c/w QRMax Lever (Red [default] or Choose Colour)
  • 4x M6x18mm s/s CSK Skt screws
  • 4x M6 Nylock nuts
  • 4x M6 Washers

You will need a QRMax Plate kit for each peripheral you wish to mount. If you wish to mount a central peripheral and another either left or right of it, you may need to extend the table with plates (not supplied) to support the QRMax Base Plate(s) on the side.

QRMax Base Drilling Template - download here

A Dust Cover Plate is available for when the base is not in use - QRMax Dust Cover Plate


Note: This item is made from 3D printed PETG and can withstand temperatures up to 80°C without deformation or softening. There will be obvious print lines on this product due to the nature of 3D printing. Please use the contact us form if you require a higher temperature material and we will endeavour to accommodate your requirements at an extra cost.

Your IP Address is:

Copyright © 2023 QR4rigs