The QRPro Base Mount VESA has a 125mm square baseplate and is designed to accomodate controllers and small panels that are light weight and low force, for example: Button Boxes, UFC and MIP devices.
Important Note: Joysticks, handbrakes and gear levers would be considered high force and larger throttle quadrants considered heavy weight and therefore are NOT supported when using this base mount.
The QRPro Base Mount VESA is designed to be fixed to a standard VESA 75x75 mount of around 1.5 to 2mm thickness and comes supplied with M4x10mm CAP Head Allen Screws and washers. The screws must not protrude past the surface of the QRPro Base Mount VESA once tightened so if your VESA mount is not within the specified thickness you will need to source alternative fixings.
The Lever comes in Red as default, but you can choose from 9 different colours when adding to your cart at no extra cost if you want a different accent theme on your rig!
This kit contains:
- QRPro Base Mount VESA c/w QRPro Lever (Red [default] or Choose Colour)
- 4x M4x10mm Button Head Allen Screws
- 4x M4 Washers
You will need a QRPro QR Plate kit for each peripheral you wish to mount to this base.
Downloads:
QRPro Base Mount VESA Instructions - TBA
A Dust Cover Plate is available for when the base is not in use - QRPro Dust Cover Plate
Note: This item 3D printed, there will be obvious print lines on this product due to the nature of 3D printing. You may need to drill holes and need longer bolts than supplied if the plate you are fixing to is more than 2mm thick.
