These Joystick extensions are part of our new simplified Genβ (Generation Beta) range designed to fit Standard 5pin Joystick Bases such as those manufactured by Thrustmaster, Virpil, Moza and VPforce and are for use with Thrustmaster, Virpil and Moza joystick grips as supported by each Base manufacture in the compatability section.
IMPORTANT: Whilst the extension will physically fit in either the Moza AB9 or the VPforce Rhino (or other 5pin joystick bases), only the models with 'F' in the prefix of the model name are currently supported for use with Force Feedback (FFB).
For Thrustmaster and Moza grips, by default these extensions incorporate a 15° counter clockwise rotation of the top fixing for better wrist comfort with right handed operation when the joystick is centre mounted. earlier VPC grips can be mounted in any orientation and later notched grips in 22.5° rotational steps from straight.
NOTE: You can also choose 0° grip rotation when selecting your extension if you wish to have a forward facing grip like most civilian helicopters would have.
The main 30mm diameter tube has been bulked up over our previous offerings with thicker walls and different priinting enhancements to be able to cope with the extra forces invoked by strong spring settings and force feedback of some bases. There are Anodised Aluminium Base and Grip Screw Tops to aid with tightening and avoid rotation of grips when in use. The extension places the grip up and towards the pilot by the height and offset indicated in the model name (see pictures 1 thru 3 for naming convention examples).
Unlike most others available, these extensions are fully hardwired allowing easy no-fuss swap out between joystick handles and extension/no extension modes1.
No further adapters are required (or supported) for these to work as intended, directly with the bases listed and the grip(s) supported by the Base manufacturer(s).
NOTE: Please measure the height/offset you need carefully before ordering, we cannot accept a return if you find you have not ordered the correct one and the package has been opened.
IMPORTANT NOTE: If you are using a Rhino FFB Base in reverse configuration (with stop switch away from the pilot for the Rhino), you will need to:
- reverse the 5-pin Plug housing in the bottom of the extension itself.
This is easy to do by loosening 2 screws and gently lifting the plug housing in the Extension, rotating the plug housing 180° and replacing the screws.
Do not overtighten the screws.
Compatability
- Adding/stacking any additional extension is not supported, whether OEM, 3rd Party or QR4rigs.
- Z-Axis extensions are not supported at either end.
- Other than those listed below, no other bases or grips are considered compatible at this time.
Base
- Thrustmaster Warthog Base
- Thrustmaster Cougar Base
- Thrustmaster AVA Base
- VPC WarBRD Series Base
- VPC MongoosT-50 Series Base
- Moza AB9
- VPforce Rhino
Grips4
- Thrustmaster grips
- Virpil grips
- Moza grips
Customer Video
Notes:
1. Please disconnect the base from the power and USB when swapping between joysticks/extensions!
2. Pushing your joystick beyond it's movement limits with force may result in breaking the extension itself, particularly with the longer extensions.
3. If self calibrating your FFB base, please ensure that the grip does not come in to contact with any part of your rig as the impact may damage the extension detrimentally.
4. Adding the extension allows the supported grips to operate in the same manner as directly connecting them to the specific Base only. No electrical functionality is added or taken away.
5. Virpil (VPC) Bases only:
- Remove the 2 bolts holding the female grip connector in place in the VPC Base before attaching the extension to prevent damage to the connectors. Refer to the VPC Base user manual for more information. (see photo #8)
- The plug pulls out of the Virpil grips to make connecting easier. (see photo #9)
If you need a different height or offset, please use Custom Joystick Extension Request form to get in touch!
Note: This item is 3D printed. There will be obvious print lines on this product due to the nature of 3D printing. The colour of the base interface, plug and socket holder (not visible once installed) will vary depending on model chosen. We have colour coded them to make sure we send you the right one!
