Quick Release Base Mounts

The majority of our products require a QR Base Mount attached to your rig. We normally pack the required hardware such as nuts, bolts and washers to help you attach to your rig, but as all rigs are customisable, sometimes you may need to source longer bolts to suit your needs. We also include a  QR code for you to scan giving you access to Drilling measurements and sometimes instruction where we believe it is not obvious.

QR Naming Convention
Each position on your rig has a QR Base Mount System, the QR Family, controller types and position on your rig are shown in the picture below along with a size comparison and the corresponding colour swatch so you can match your QR Plates easily and visually.

 

 

NOTE: You will need a QR Base Mount for each position on your rig you want to enable QR and a QR Plate with the matching QR Family name and colour swatch for each your controllers you wish to mount to them, which gives you the option to have the controller on your rig or off and out of the way.

For instance you can only mount QRPro Controller Plates to QRPro Base Mounts, QRPro Controller Plates will not fit QRDee, QRMax, QRMin or any other family of QR Base Mount.

Note: The QR Plates are not interchangeable between different families of QR Base Mounts

If you can't find what you need or are unsure which parts suit your needs best, please use the contact us form to get in touch. 

QRPro Quick Release Base Mount 40

QRPro Quick Release Base Mount 40

The QRPro Base Mount 40 has a 125mm square baseplate and is designed to accomodate most side and centrally mounted controllers. NOTE: If you have a ...

£32.32
... more info
QRPro Quick Release Base Mount DOFR

QRPro Quick Release Base Mount DOFR

The QRPro Base Mount DOFR has a 125mm square baseplate and is designed to accomodate most side and centrally mounted controllers. The QRPro Base...

£31.19
... more info
QRPro Quick Release Base Mount VESA

QRPro Quick Release Base Mount VESA

The QRPro Base Mount VESA has a 125mm square baseplate and is designed to accomodate controllers and small panels that are light weight and low force...

£39.81
... more info
QRDee Centre Quick Release Base Mount 40

QRDee Centre Quick Release Base Mount 40

The QRDee System is designed around the Thrustmaster Warthog Joystick base and shares the same radius. NOTE: If you have a DOF Reality rig and wish...

£25.09
... more info
QRDee Quick Release Base Mount DOFR-Main Beam

QRDee Quick Release Base Mount DOFR-Main Beam

The QRDee Base Mount DOFR has a rounded front edge and is designed to accomodate most centrally mounted joystick controllers. Please note: Our...

£28.04
... more info
QRMax Quick Release Base Mount 40

QRMax Quick Release Base Mount 40

The QRMax Base Mount 40 is a 180mm wide x 150mm deep baseplate and is designed to accomodate most table mounted peripherals. NOTE: If you have a ...

£47.51
... more info
QRMax Quick Release Base Mount DOFR

QRMax Quick Release Base Mount DOFR

The QRMax Base Mount DOFR is a 180mm wide x 150mm deep baseplate and is designed to accomodate most table mounted peripherals. The QRMax Base Mount...

£70.20
... more info
QRMin Quick Release Base Mount 40 Kit x2

QRMin Quick Release Base Mount 40 Kit x2

This Quick Release Footplate System is designed to accomodate mid mounting Rudder Pedals supports (most of) the VPC range of Rudder Pedals only at...

£35.50
... more info
QRMin Quick Release Base Mount 40 Kit x3

QRMin Quick Release Base Mount 40 Kit x3

This Quick Release Footplate System is designed to accomodate mid-front mounting Rudder Pedals such as the MFG Crosswind Rudder pedals. Please note:...

£35.61
... more info
Your IP Address is: 18.97.14.84
Copyright © 2024 QR4rigs Ltd. Registered in England and Wales at 40 Market Place, Belper, England, DE56 1FZ. Company Number 15573695