The QRDee System is designed around the Thrustmaster Warthog Joystick base and shares the same radius.
New QRDee 40-Series Compatability
The QRDee Base Mount 40 is a new edition and replaces the original version of the trusty QRDee Base Mount. The QRDee system remains entirely compatable as there is no change to the Quick Release system itself.
The main change is to the mounting holes for the base itself to give more mounting choices, including on to 40-Series Aluminium Extrusions.
Along with 40mm centres, we have retainined the 60.1mm centre holes, the same mounting points for the most common flight sim controllers such as the Warthog Joystick from Thrusmaster so they can fix easily to some if not most flight themed rigs already out there. A template is provided below for those who are more DIY minded and may have solid mounting plates that require drilling.
If you have a 40-Series Profile Aluminium Extrusion based rig, you will need to choose optional 40-Series Profile fixing kit to help you fit the base mount to your rig directly to the extrusion itself, without the need for a metal mounting plate underneath. This kit comes with fixings and 'Drop-in' T-nuts so there is no need to remove any end caps you may have fitted.
The Lever comes in Red as default, but you can choose from 9 different colours when adding to your cart at no extra cost if you want a different accent theme on your rig!
This kit contains:
- QRDee Baseplate Assembly c/w QRDee Lever (Red [default] or Choose Colour)
- Option 1: Standard Fixing Kit [default]
- 4x M6x18mm CSK s/s Skt Screws
- 4x M6 s/s washers
- 4x M6 s/s Nyloc Nuts
- Option 2: QRDee 40-Series Profile Fixing Kit
- 4x M6x18mm CSK s/s Skt Screws
- 4x M6 Drop-in T-Nuts
You will need a QRDee QR Plate kit (sold separately) for each peripheral you wish to mount.
Downloads:
QRDee Base Mount 40 Drilling Template - download here
A Dust Cover Plate is available for when the base is not in use - QRDee Dust Cover Plate
Note: This item is made from 3D printed PLA+, there will be obvious print lines on this product due to the nature of 3D printing. You may need to drill holes and need longer bolts than supplied if the plate you are fixing to is more than 5mm thick.
