QRPro Universal Quick Release Plate Kit (DIY)

  • Model: QRProUniQR
  • Manufactured by: QR4rigs

 Ask a Question 

Starting at: £20.24

Please Choose:

Screw Type (optional)








Add to Cart:

This QRPro Universal Quick Release Plate Kit is designed to allow mounting of unsupported controllers on to our QRPro Quick Release System.

There are a lot of controllers available today and some have unique mountings (or none at all) that cannot directly translate to our QRPro Quick Release system so here at QR4rigs, with this kit we have now provided you with a way for you to easily swap out your controllers on your rig when swapping between Racing and Flight sims where we have not managed to design a direct solution.

This QRPro Universal Quick Release plate attaches to any suitably strong sheet material (we will refer to this as the Adapter Plate from heronin) which you will have to source, supply and attach your controller to by any means you deem suitable. The minimum footprint/size and thickness of the Adapter Plate should be large enough to allow for the heads of the fixings, but can be any size you like within reason to accomodate your controllers base. The larger the adapter plate, the thicker it would need to be to supoort your controller. For the QRPro Universal Quick Release Plate, we would recommend not exceeding 225mm2

All holes are tapped/threaded to M6 (6mmx1mm) standards and all fixing kits use this too.

We suggest the following minimum thickness of these example Adapter Plate sheet materials:

  • Steel Sheet (stainless or painted) 2 - 3mm (~1⁄8")
  • Aluminim Tread Sheet 2.5 - 4mm (~3⁄16")
  • Acrylic/Plexiglass 5 - 6mm (~1⁄4")
  • Plywood >6mm (>1⁄4")
We DO NOT supply the intermediate sheet material as this would make shipping costs ridiculous, most local hardware stores and online sheet material suppliers can supply and ship directly to you and some provide a very cheap cutting service too.

Screws are entirely optional and not included unless you choose a size when adding to the shopping cart.

We do however supply a 1:1 scale accurate printed drawing you can affix to your sheet material to help you mark out the holes for the QR Plates.

Some mounting screws of various types are optional to purchase, we strongly recommend that 6-8mm of the M6 thread is threaded into the QR Plate, please ensure that you add the thickness of your material to this to work out which screws you will need and DO NOT exceed 8mm depth in to the QRPro Universal Quick Release Plate

Examples of recommended fixing types/lengths:

  • 3mm (1⁄8") Steel sheet = 10mm Flat head CAP Screws
  • 4mm (3⁄16") Aluminium sheet =12mm Flat head CAP Screws
  • 6mm (1⁄4") Acrylic/Plexiglass sheet = 14mm CSK Screws
  • 9mm (3⁄8") Plywood sheet = 16mm CAP Screws c/w 1mm washer or 16mm CSK Screws

You can choose to add these to your order or to supply these yourself of course.

We have sourced some ultra Flat head CAP Allen screws that only protrude approx 1.5mm above the surface and have rounded edges. Alternatively, if you prefer a flush finish, you can choose from the Countersunk screws available or source your own, but please ensure that the screws do not go deeper than 8mm in to the body of the QRPro Universal Quick Release Plate.

This kit contains:

  • 1x QRPro Universal QR Plate
  • 1:1 scale printed drilling template
  • 4x Screws can be chosen and are entirely optional

You will need a QRPro Quick Release Base Mount to mount to your rig in order to use the QR Plate in this kit.


Note: This item 3D printed, there will be obvious print lines on this product due to the nature of 3D printing.


Your IP Address is: 18.97.14.84
Copyright © 2024 QR4rigs Ltd. Registered in England and Wales at 40 Market Place, Belper, England, DE56 1FZ. Company Number 15573695