The QRMax Base Mount 15 is a new edition and fits to 1545 or 1560 extrusion exclusively.
The QRMax Base Mount 15 is a 180mm wide x 150mm deep baseplate and is designed to accomodate most table mounted peripherals.
The fixing holes are in two columns 4" apart with 3/4" spacing between each row.
The fixing kit comes with M6 fixings and 'Drop-in' Hammerhead T-nuts so there is no need to remove any end caps you may have fitted and is suitable for 15 series profile.
NOTE: For Direct Drive wheels, we recommend using 1560 extrusion to fix to.
The Lever comes in Red as default, but you can choose from 9 different colours when adding to your cart at no extra cost if you want a different accent theme on your rig!
Kit contains:
- QRMax Base Mount 15 c/w QRMax Lever (Red [default] or Choose Colou
- 4x M6x18mm CSK s/s Skt Screws
- 4x M6 Drop-in T-Nuts
In addition to this base plate, you will also need a QRMax QR Controller Plate for each controller/peripheral you wish to mount.
Instructional Videos
QRMax Base Mount Calibration
Downloads:
QRMax Base Mount 15 Mounting Instructions - TBA
A Dust Cover Plate is available for when the base is not in use - QRMax Dust Cover Plate
Note: This item 3D printed, there will be obvious print lines on this product due to the nature of 3D printing. You may need to drill holes and need longer bolts than supplied if the plate you are fixing to is more than 5mm thick.
