The QRPro Base Mount BSB Edition has a 125mm square baseplate and is designed to accomodate most side and centrally mounted controllers.
The included QRPro Base Support Bracket (BSB), (also available separately if you already have a QRPro Base Mount), is used to provide support underneath the QRPro Base Mount. There are various Fixing Kit options.
The BSB is made from 6mm thick Aluminium Plate and has a textured black powdercoat finish. It is the same shape as a QRPro Base Mount providing minimal footprint of 125mm². It has a variety of M8, M6 and M4 countersunk and counterbored holes and fixes to most series of extrusion profiles. You can choose the right fixing kit for your rig to get the best outcome possible.
For M8 and M6 fixings, only 2 fixings are required into extrusion profile, giving a variety of mounting point options (see pic for examples). Other fixing solutions would be best with 4 fixings.
The QRPro Base Mount is fixed to the Support Bracket with the included 4x M6x12mm Countersunk screws.
The QR Lever comes in Red as default, but you can choose from 9 different colours when adding to your cart at no extra cost if you want a different accent theme on your rig!
This kit contains:
- QRPro Base Mount c/w QRPro Lever (Red [default] or Choose Colour)
- QRPro Base Support Bracket (BSB)
+ plus one of the folowing options: - Option 1: 40-Series M6 Fixing Kit
- 1x QRPro Base Support Bracket
- 4x M6x12mm CSK s/s Screws
- 2x M6x16mm CSK s/s Screws
- 2x M6 T-Nuts
- Option 2: 40-Series M8 Fixing Kit
- 1x QRPro Base Support Bracket
- 4x M6x12mm CSK s/s Screws
- 2x M8x16mm CSK s/s Screws
- 2x M8 T-Nuts
- Option 3: 30-Series M6 Fixing Kit
- 1x QRPro Base Support Bracket
- 6x M6x12mm CSK s/s Screws
- 2x M6 T-Nuts
- Option 4: Std M6 Fixing Kit
- 4x M6x12mm CSK s/s Screws
- 4x M6x18mm CSK s/s Screws
- 4x M6 s/s Washers
- 4x M6 s/s Nylock Nuts
- Option 5: M4 (warthog mounting pattern)
- 4x M6x12mm CSK s/s Screws
- 4x M4x18mm CSK s/s Screws
- 4x M4 s/s Washers
- 4x M4 s/s Nylock Nuts
You will need a QRPro QR Plate kit for each peripheral you wish to mount to this base.
Downloads:
QRPro Base Mount BSB Edition Instructions - download here
A Dust Cover Plate is available for when the base is not in use - QRPro Dust Cover Plate
FAQ:
- All QRPro Base Mounts are entirely compatable with all QRPro Controller Quick Release Plates.
- The 40-Series M8 and M6 Fixing Kits will also fix to 15-Series Extrusion
- If you have a DOF Reality rig then please have a look at our QRPro Quick Release Base Mount DOFR for a no-drill variant.
- Our QRPro Base Mount kits do not support FFB devices.
- Unfortunately, currently we do not have a QR Base that supports long lever devices, such as handbrakes, sequential shifters and collectives.
- The QRPro Base Support Bracket will not fit the Next Level Racing Flight series or Flight packs. You will need the QRPro Base Support Bracket NLR Flight Series (available separately).
Note: This item 3D printed, there will be obvious print lines on this product due to the nature of 3D printing. You may need to drill holes and need longer bolts than supplied if the plate you are fixing to is more than 5mm thick.
