QRUHD Moza AB9 Quick Release Plate Kit

This QRUHD Adapter Kit is designed to mount to the base of the MOZA AB9 Joystick base assembly to enable quick mounting and dismounting of the joystick.

The Assembly is designed primarily for mounting the Joystick from the front of the rig towards the rear of the rig to suit mounting in the most common orientation in front and below of the seat center. Optionally the Adapter plate can be rotated 180° to accomodate mounting from the rear of the rig towards the front if your scenario dictates this as a necessity. The Adapter Plate has 2 alignment positions, rear or mid - see Mounting Instructions for more details.

IMPORTANT:

• Always use the 2x Thumbscrews/M6 Form ‘G’ washers that are supplied with the QRUHD Base Mount to secure the QR Plate to the QRUHD Base Mount once locked in place.
• Always only use the QR Levers when the Thumbscrews are removed to lock/unlock the QR Plate.
• Never use the QR Levers to eject heavy devices, just unlock them a little and then use both hands to remove the controller/QR Assembly

This Kit includes the following parts:

• 1x QRUHD Moza AB9 QR Plate
• 6x M6x20mm s/s CSK Screws
• 6x M6 s/s Nuts
• 4x M6x16mm s/s CSK Screws
• 2x M4x14mm s/s CSK Screws

You will need a QRUHD Quick Release Base Mount to mount to your rig in order to use the QR Plate in this kit.

Downloads:

• Mounting Instructions

Note: There will be obvious print lines on this product due to the nature of 3D printing.