QRMax Quick Release Base Mount 40

  • Model: QRMaxBase40
  • Shipping Weight: 300g
  • Made to Order [ETA to print room= next business day]
  • Manufactured by: QR4rigs

 Ask a Question 

Starting at: £47.51

Please Choose:







Add to Cart:

The QRMax Base Mount 40 is a 180mm wide x 150mm deep baseplate and is designed to accomodate most table mounted peripherals.

NOTE: If you have a DOF Reality rig, then please have a look at our QRMax Quick Release Base Mount DOFR for a no-drill variant.

New QRMax 40-Series Compatability
The QRMax Base Mount 40 is a new edition and replaces the original version of the trusty QRMax Base Mount. The QRMax system remains entirely compatable as there is no change to the Quick Release system itself.

The main change is to the mounting holes for the base itself to give many more mounting choices, including on to 40-Series Aluminium Extrusions. We have retainined the legacy mounting holes at 78.4mm x 66mm and 150mm x 60.1mm for the original mounting choices. A template is provided below for those who are more DIY minded and may have solid mounting plates that require drilling.

If you have a 40-Series Profile Aluminium Extrusion based rig, you will need to choose optional 40-Series Profile fixing kit to help you fit the base mount to your rig directly to the extrusion itself, without the need for a metal mounting plate underneath. This kit comes with fixings and 'Drop-in' T-nuts so there is no need to remove any end caps you may have fitted.

Whatever you are mounting to, we recommend no less than 66% coverage of the total surface area of the Base Mount. For the QRMax this would be 120mm wide by 100mm deep absolute minimum or preferrably as big or bigger than the Base Mount itself. In terms of 40 series profile, this would be 40120 minimum rather than the more popular 4080.

If however, this is not possible and only a 40mm edge is available to mount to, then we have a solution:
The QRMax Base Support Bracket 40 can be used to provide support underneath the QRMax Base Mount. You can choose to purchase the QRMax Base Support Bracket 40 + Fixing kit along with your QRMax Base Mount 40 from the Fixing Kit options.

Note: The Base Support Bracket is not intended or supported to be used in conjuction with FFB devices or Direct Drive Wheel Bases, they may add too much stress to the plate.

The Lever comes in Red as default, but you can choose from 9 different colours when adding to your cart at no extra cost if you want a different accent theme on your rig!

Kit contains:

  • QRMax Base Mount c/w QRMax Lever (Red [default] or Choose Colour)
    • Option 1: Standard Fixing Kit 1 [default]
      • 4x M6x18mm CSK s/s Skt Screws
      • 4x M6 s/s washers
      • 4x M6 s/s Nyloc Nuts
    • Option 2: 40-Series Profile Fixing Kit
      • 4x M6x18mm CSK s/s Skt Screws
      • 4x M6 Drop-in T-Nuts
    • Option 3: QRMax Base Support Bracket 40 + Fixing Kit
      • 4x M6x18mm CSK s/s Skt Screws
      • 6x M8x18mm s/s CSK Skt Screws
      • 6x M8 Roll-in T-Nuts

In addition to this base plate, you will also need a QRMax QR Controller Plate for each controller/peripheral you wish to mount.

Instructional Videos

QRMax Base Mount Calibration
 

Downloads:
QRMax Base Mount 40
Instructions/Drilling Template - download here
 

A Dust Cover Plate is available for when the base is not in use - QRMax Dust Cover Plate

Note: This item 3D printed, there will be obvious print lines on this product due to the nature of 3D printing. You may need to drill holes and need longer bolts than supplied if the plate you are fixing to is more than 5mm thick.


Current Reviews: 2

Your IP Address is: 3.230.173.188
Copyright © 2024 QR4rigs Ltd. Registered in England and Wales at 40 Market Place, Belper, England, DE56 1FZ. Company Number 15573695